Smart Ethernet Switch Series User’s Manual
When an untagged packet is received on port 2, the packet is sent to ports 5, 6, 7 and 8. In
addition, before sending the packet to ports 6 and 7, the packet is tagged.
Figure 6-16 Example: 802.1Q VLAN Configuration
6.6. Port Mirror Configuration
With port mirroring, the switch copies the incoming and/or outgoing traffic from a port to
another port. This is usually used for traffic analysis and diagnostic purposes.
Click Switch Configuration > Port Mirror Configuration to display the screen.
44
To Next Page
Loading...
