Smart Ethernet Switch Series User’s Manual
Figure 6-5 Switch Configuration: QoS Configuration
The following table describes the labels in this screen.
Table 6-3 Switch Configuration: QoS Configuration
LABEL DESCRIPTION
802.1p
VLAN
Priority
Select Enabled to set the switch to prioritize VLAN tagged packets. VLAN tagged
packets with priority levels 0 through 3 are treated as high priority. Priority levels 4
through 7 are treated as low priority.
Select Disabled to set the switch not to prioritize VLAN tagged packets.
High/Low
Priority
Ratio
Select 4:1, 8:1 or 16:1 to set the switch to assign the selected ratio of the bandwidth for
transmitting high and low priority packets respectively.
Select Disabled to disable this feature.
Port
Priority
This list displays the priority of the port.
To set the priority of the ports, right-click and select Low Priority or High Priority.
Port This field displays the port number.
Priority This field displays the priority level (High Priority or Low Priority) of the port.
If a port is set to high priority, it means all traffic to the port is prioritizes and processed
first.
Apply Click Apply to save the changes in the RMT.
6.4. Introduction to VLAN
Virtual LANs are logical grouping of devices on different network segments and allows the
35
To Next Page
Loading...
