COBHAM HGA-7001 User Manual

HGA-7001
Installation Manual
Document: 862-A0089_IM issue 1.6 COMPANY CONFIDENTIAL
Page 38 of 45
7. SPECIAL TOOLS, FIXTURES AND EQUIPMENT
7.1 Introduction
This section provides a table with all the tools, fixtures and equipment required to perform the
installation of the HGA-7001. It does not reference tools considered to be part of the average
workshop tool inventory.
7.2 Tools, fixtures and equipment
Refer to Table 10 for a list of the tools, fixtures and equipment necessary to perform the installation of
the HGA-7001.
NOTE: EQUIVALENT SUBSTITUTES MAY BE USED.
Table 10: Installation Tools, Fixtures and Equipment
Name
Specification or
Part Number
Source code or CAGE
code
Cobham Part
Number
1 Torque wrench 1 Nm (0.7 ft-lb) Commercially available N/A
2 Torque wrench 1.5 Nm (1.1 ft-lb) Commercially available N/A
3 Torque wrench 2.2 Nm (1.6 ft-lb) Commercially available N/A
3 Torque wrench 3.5 - 5 Nm (2.6 – 3.7 ft-lb) Commercially available N/A
4 Inclinometer Digital, accurate to 0.1 degree Commercially available N/A

COBHAM HGA-7001 Specifications

General

Brand	COBHAM
Model	HGA-7001
Category	Antenna
Language	English