COBIO S80 - Error Codes and Handling; Performance Analysis and Parameters

CB-MF-SOP-002
A/1
27
⚫ Do not use alcohol cleaning fluid other than liquid to wipe the lens.
7 Errors and Handling
Error Code
Trouble
Troubleshooting
001
Distilled water is insufficient
Add distilled water
003
Liquid waste is full
Empty the liquid waste in the liquid waste barrel
004
The work door is open
Close up the work door
005
Without counting chamber former rail
Install the counting chamber former rail
006
Without counting chamber rear rail
Install the counting chamber rear rail
007
Counting chamber is insufficient
Add the counting chamber
008
Counting chamber waste materials
box is open
Install the counting chamber waste materials box
and push it in
009
Centrifugal door is open
Install a centrifugal cover
010
Test tube racks are full in exit area
Remove the test tube racks from the exit area
011
The abandoned counting chamber
waste materials boxes are full
Empty the counting chamber waste materials
boxes
Table 7-1
Please contact professional maintenance personnel of COBIO Smart Healthcare Technology
Co., Ltd., if the above error report or failure cannot be solved by the above methods.
8 Performance Analysis
Function Parameter
1. Parameter Setting
1) The number of pictures for each sample can be filmed to be 5, 10, 15 and 20 pieces.
2) The user can customize the start number.
2. Storage
Have storage functions for parameter setting and test result.
3. Data System
The data system should have the following functions:
1) Input patient information, hospital information and test results to form test reports and save
them.
2) Search report records according to patient information and test date.
4. Have report printing function.
Performance Index