The time interval for Power, Microphone and Speaker can be adjusted. By default, these
are set to 900 seconds for Power Failure tests and 0 Seconds (Disabled) for Mic/Speaker
tests.
The volume of the Mic/Speaker test can be adjusted via a drop-down menu.
With SNMP Traps enabled, enter the SNMP server name, port number (162 by default) and
Read/Write Community Names.
Each trap can be enabled or disabled to customize the output.
Diagnostics
LS1000 VoIP Speakerphone
Administrator Guide
page 37 of 54 GU-164-B
Code Blue
• 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com
To Next Page
Loading...
