Code Blue IPVT01 - In-Call Commands

LS1000 VoIP Speakerphone
Administrator Guide
page 40 of 54 GU-164-B
Code Blue
• 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com
In-Call Command
Function
Description
4
Aux 1 Output
Toggle contact closed/open
5
Aux 2 Output
Toggle contact closed/open
6
Increase Mic Gain
Small adjustments to LS1000 microphone
7
Decrease Mic Gain
Small adjustments to LS1000 microphone
8
Increase Speaker Gain
Small adjustments to LS1000 speaker
9
Decrease Speaker Gain
Small adjustments to LS1000 speaker
You can make adjustments during a live phone call with the LS1000 device. This can be
done by calling into the LS1000 or by a call initiated by the LS1000 to the receiving party.
The party with the touch-tone phone can use the keys on their keypad via DTMF tones to
make adjustments.
11 In-Call Commands
Note: These adjustments do not persist after the call has ended. The LS1000 phone will
return to the default levels set in the account screen via the phone’s web GUI. See the
Accounts chapter for further information.