C001537_15_CR2_User_Manual 3
Save Settings
1.2 - Unpacking
Remove the imager from its packing and inspect it for damage. If the scanner was damaged during shipping, please call
Code at (801) 495-2200.
The standard CR2 unit is shipped with a USB cable interface. The unit also features a battery blank which must be
installed when using the reader (except when attached to the H2, BH1 or BH2 handle).
Various accessories are available for the CR2.
• 4 cable options (USB 6ft., USB 12 ft., RS-232 or PS/2)
• 1950 mAH long-life Lithium-Ion battery
• Class 1 Bluetooth radio with 300 foot operating range (shorter ranges available)
• Clip-on pistol grip handle
• Ruggedized Cabled Handle
• Battery Handle (in two battery sizes)
• External single-bay and two-bay battery charger
• CodeXML Bluetooth modem
• Protective Elastomer Boot
• Protective Case Cover or Holster
• Power Supplies: US/Europe/SA/UK/Asia
• Reader Stand
• Lanyard Hook attachment option
Please keep your packing materials. The CR2 is shipped in an approved shipping container and should be used if you
ever need to return your equipment for servicing.
To Next Page
Loading...
Need help?
General
