Charging
When you are reading codes with your wireless reader, blinking red status indicators and a warning on the OLEDdisplay
signal a low battery. As the battery discharges, the blink frequency increases. A blinking red status indicator indicates low
battery or thermal shutdown mode.
You can also check the battery status icon on the OLED display .
Place the reader on the base station for charging. Make sure that the pins at the end of the handle make contact with the pins
in the base station.
Reader Charging Reader Fully Charged
Summary of indicator charging signals:
Condition Status Indicator: Reader
1
Status Indicator: Base Station
Battery low flashing RED indicators steady BLUE, indicating connection
Reader is charging in the base station indicator is off until fully
charged
steady RED, indicating battery charging
Reader is fully charged in the base
station
steady GREEN indicators steady RED, indicating contact status with the
cradle
1
Every time the reader is connected to the base station, the reader is blinking BLUE to indicate the connection with the base station.
44
Connection Options
To Next Page
Loading...
