Changing Batteries
To change batteries, perform the following steps:
1. Lift the metal tab and open the end cap of the reader.
2. Hold the reader in an upright position and the battery slides out of the handle.
Note: You may need to shake the reader slightly.
WARNING: The battery used in these devices may present a risk of fire or chemical burn if mistreated. Do not
disassemble, heat above 60 ºC (140 ºF), or incinerate. Replace battery with Cognex DMA-BATTERY-5000 only.
Any other battery may present a risk of fire or explosion.
45
Connection Options
To Next Page
Loading...
