Installing In-Sight
®
1720 Series Wafer Readers
31
Network
1 Ethernet port, 10/100 Base-T, TCP/IP protocol. Supports DHCP (factory default) or
static IP address.
Serial
1 RS-232C port (4800 to 115,200 baud rates).
Communications
Protocols
In-Sight, Native Mode, Electroglas and LKx5.
Power
24 ±10% VDC; 140mA (illumination off) to 200mA (illumination on).
Material
Aluminum housing, black anodized with nickel-plated black end caps.
Mounting
Eight 7.3mm deep M4 threaded mounting holes (four per side).
Maximum torque 1.5 N-m (13.5 in-lb).
Dimensions
125.8mm (4.95in) x 70.4mm (2.77in) x 36.9mm (1.45in)
Horizontal configuration length: 151.2mm (5.95in)
Mechanical
Weight
379.9 g (13.4 oz).
Temperature
0 to 45°C (Operating), -10 to 65°C (Storage).
Environmental
Humidity
10 to 90%, non-condensing (Operating and Storage).
CE, UL, CUL, FCC
IEC 60825-1/A2:2001, EN 60825-1/A1:2002, CAN/CSA-E60825-1:2003 Class 1 LED Product
Certifications
This equipment conforms with the applicable requirements of SEMI S2-0703a
To Next Page
Loading...
