MACHINE PREPARATION
1. INTENDED USE
The scrubbing machine is designed exclusively for the professional cleaning of
surfaces and floors in industrial, commercial and public environments. In
addition, only use the machine in closed or at least covered environments.
2. HANDLING THE PACKED MACHINE
The machine is contained in specific packaging.
It is not possible to place more than two packages on top of each other.
The overall dimensions of the package are:
A
B
C
A
C
B
3. HOW TO UNPACK THE MACHINE
1. Remove the outer packaging.
2. Release the parking brake by means of the pedal in the front left part of the
machine (1).
3. The machine is secured to the pallet with wedges that lock the wheels,
remove these wedges (2)
4. Use a chute (3) to get the machine down from the pallet, pushing it
backwards. Do not assemble the rear squeegee before unloading the machine,
and avoid violently jolting the brush base.
5. Keep the pallet for any future transport needs.
ATTENTION: if the product is delivered in cardboard
containers, handle the packed product with suitable lifting
means that comply with the legal requirements.
To Next Page
Loading...
