General Safety Precautions
11
ge-0-0-0_01.FM
00/0710
Putting Out of Service and Dismantling
Putting out of service defines the activities involved in the mechanical and electrical
removal of the Robot and Control System from a production unit or from an environment
in which it was under study.
Dismantling consists of the demolition and dismantling of the components that make up
the Robot and Control System.
Integrator
The integrator is the professional expert responsible for the installation and putting into
service of the Robot and Control System.
Incorrect Use
Incorrect use is when the system is used in a manner other than that specified in the
Technical Documentation.
Range of Action
The robot range of action is the enveloping volume of the area occupied by the robot
and its fixtures during movement in space.
1.2.3 Applicability
These Specifications are to be applied when executing the following activities:
– Installation and Putting into Service;
– Programming Mode;
– Auto / Remote Automatic Mode;
– Robot axes release;
– Maintenance and Repairs;
– Putting Out of Service and Dismantling
To Next Page
Loading...
Need help?
General
