Comax C130 D - Cleaning the Solution Tank and Filter; Cleaning the Hopper

To Next Page

To Previous Page

DAILY MAINTENANCE

CLEANING THE SOLUTION TANK AND FILTER

With the solution tank empty:

1. unscrew the filter and rinse the inside thoroughly

2. remove the cartridge and clean it

3. turn on the tap

4. Rinse the tank with a water jet

5. reassemble everything, repeating the above-mentioned operations in the

reverse order

Notes: You can still clean the filter, even if the solution tank is full; just

remember to turn off the tap

CLEANING THE HOPPER

1. Remove the clip from the right-hand side bar, and rotate it outwards

2. Release the pin of the hopper (1)

3. Remove the hopper (2) and clean it

4. Remove the filter (1) and clean it

5. reassemble everything, carrying out the above-mentioned operations in the

reverse order