Comax C130 D - Troubleshooting; Insufficient Water on the Brushes; The Squeegee Does Not Dry Perfectly

To Next Page

To Previous Page

TROUBLESHOOTING

INSUFFICIENT WATER ON THE BRUSHES

1. Check the tap is turned on

2. Check the solenoid valve switch is on

3. Check there is water in the solution tank (“RESERVE” indicator light off)

4. Clean the solution filter

THE SQUEEGEE DOES NOT DRY PERFECTLY

1. Check the squeegee is clean

2. Check the regulation of the squeegee (see “MACHINE PREPARATION”)

3. Clean the entire suction unit (see “WEEKLY MAINTENANCE”)

4. Replace the rubbers, if worn