Commodore 128 - Loading and Running CP; M Software

Loading And Running CP I M Software
In order to run CP I M software on the C128, the CP I M Plus 3.0 operating
system must first
be loaded into the computer, i.e. the C128 must be in
CP 1M Mode. This is described on page 25.
When the C128 is in CP 1M Mode, remove the CP 1M Plus System Disk from
the disk drive and store
it in a safe place. Then insert the required CP 1M
program disk into the disk drive and close the disk drive door. Type in the
program name as
given in the user manual for that piece of software, and
press RETURN. You then follow the instructions
given on the screen or in the
user manual for that software.
36