Security Features 13-11
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: Beth Zanca Saved by: Compaq Customer Saved date: 04/26/00 4:58 PM
Part Number: 170045-002 File name: Ch13
3. Enter your current password, followed by the appropriate
syntax for your computer keyboard. For example, if you have
a Belgian keyboard, you will type the following:
current password=
IMPORTANT: Type carefully. For security reasons, the
characters you type do not appear on the screen.
4. The password is deleted.
Enabling and Disabling Devices
Several devices can be disabled to prevent the unauthorized
transfer of data using these devices:
■ Diskette drive
■ Diskette drive boot ability
■ Serial port
■ Parallel port
To disable or enable a device:
1. Run Computer Setup by turning on or restarting the computer
(StartÅShut DownÅRestart). When the blinking cursor
appears in the upper-right corner of the screen, press F10.
2. Select SecurityÅDevice Security, enter your preferences, then
press F10. You will need to enter your setup password if it is
set.
3. Select FileÅSave changes and Exit, then press Enter.
4. When prompted to confirm your action, press F10. Your
Computer will restart with the new preferences.
IMPORTANT: Devices disabled in Computer Setup cannot be
enabled in the operating system. If you are disabling a device as a
security measure, use Computer Setup Security Menu.
DriveLock Overview
DriveLock security prevents unauthorized access to hard drive
applications and user data. DriveLock sets a user password and a
master password for hard drives. The correct user password must
be entered when the computer is turned on before a protected hard
drive can be accessed. Protected hard drives remain protected even
if removed and inserted into another computer.
To Next Page
Loading...
