3-4 Using Battery Packs
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: Beth Zanca Saved by: J Abercrombie Saved date: 04/26/00 3:48 PM
Part Number: 170045-002 File name: Ch03
Inserting the Primary Battery Pack
CAUTION: If the battery pack you are about to remove is the only
source of power to the computer, initiate Hibernation or connect the
computer to external power before removing the battery.
Insert a battery pack into the battery bay with the large label on the
battery pack facing up and the battery contacts facing in. Push the
battery pack into the battery bay until it is firmly seated.
NOTE: See Chapter 5 to insert and remove battery packs to and
from the DualBay and MultiBay.
To Next Page
Loading...
Need help?
General