4-20 Managing Power
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: Beth Zanca Saved by: J Abercrombie Saved date: 04/27/00 5:38 PM
Part Number: 170045-002 File name: Ch04
Turning Auto Insert Notification On or Off
NOTE: The Auto insert notification feature is not available in
Windows 2000 Professional.
Auto insert notification runs a CD or DVD on insertion, but drains
power and prevents system-initiated Suspend (Standby) and
prevents system-initiated hibernation.
NOTE: The Auto insert notification prevents system-initiated
(timeout) suspend/hibernation in Windows 95 and
Windows NT 4.0.
To turn off Auto insert notification:
â– In Windows 95 or Windows 98 select StartÃ…SettingsÃ…
Control PanelÃ…SystemÃ…Device ManagerÃ…CDROMÃ…
Properties. Clear the Auto insert notification check box.
â– In Windows NT 4.0 select StartÃ…SettingsÃ…Control
PanelÃ…Compaq PowerÃ…Battery Conservation Settings tab.
Clear the Auto insert notification check box.
To turn on Auto insert notification, access the Auto insert
notification check box as instructed above, then select the
check box.
Changing the Processor Performance Mode
(Available on Select Models)
Computer models that provide Intel Pentium III with SpeedStep
technology allows you to enable an automatic change in processor
speed when the power source changes between AC power and
battery power.
The SpeedStep technology offers two preset performance modes:
â– In Maximum Performance mode, the processor runs at full
speed to provide maximum performance.
â– In Battery Optimized mode, the processor runs at a reduced
speed to provide optimal balance between energy conservation
and performance.
The computer can run in either performance mode while it is
running on AC power or on battery power.