7-6 Connecting to a Local Area Network (available on select models)
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: Lorise Fazio Saved by: J Abercrombie Saved date: 04/27/00 5:39 PM
Part Number: 170045-002 File name: Ch07
Reinstalling Windows NT Networking:
(Windows NT 4.0)
If it has become necessary to reinstall LAN drivers, you may also
need to reinstall Windows NT Networking.
To determine whether you must reinstall Windows NT
Networking, select StartÅ SettingsÅControl Panel, then double-
click Network.
■ If you are not prompted to install Windows NT
Networking— Go to “Reinstalling LAN Drivers: Compaq
56K (V.90) MiniPCI Modem (Windows NT 4.0)” next in this
section.
■ If you are prompted to install Windows NT Networking—
Select Yes, then use the following procedure.
To install Windows NT Networking—
1. Select StartÅSettingsÅControl Panel, then double-click
Network.
2. At the Windows NT Networking installation prompt, select
Yes.
3. Select Wired to the Network, then select the Next button.
4. Select the Select from List button.
5. Select the Have Disk button.
6. When prompted, type the path to the Intel PRO/100+ Mini PCI
drivers:
C:\Program Files\Compaq\CPQLANModem\Network
7. Select the OK button.
8. Select Intel PRO Adapter.
9. Select the OK button.
10. Select the Next button.
11. Select the network protocol(s) for your LAN environment,
then select the Next button.
12. Select the network service(s) for your LAN environment.
Select the Next button, then continue to select the Next button
on succeeding screens until you are prompted to enter a drive
designator.
13. When prompted, type the drive designator for your
Windows NT 4.0 operating system. For example, if
Windows NT 4.0 is on your hard drive, type
C: (where C: is the
designator of your hard drive).
To Next Page
Loading...
Need help?
General