7-4 Connecting to a Local Area Network (available on select models)
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: Lorise Fazio Saved by: J Abercrombie Saved date: 04/27/00 5:39 PM
Part Number: 170045-002 File name: Ch07
To reinstall modem drivers—
When you restart the computer, the computer displays the New
Hardware Found “PCI Serial Controller” dialog box.
1. Select the Next button in the dialog box, then continue to
select the Next button on succeeding screens until you are
prompted to enter a driver location.
2. At the driver location prompt, type the path to the Compaq
56K (V.90) Mini PCI drivers:
C:\Program Files\Compaq\CPQLANModem\Modem\Win9x
3. Select the Next button, then continue to select the Next button
on succeeding screens until the computer copies the
modem drivers.
4. To complete the installation of the modem drivers, select
Finish.
NOTE: It is not necessary to restart the computer after installing
the modem drivers.
Confirming the Network Protocol
(Windows 95 or Windows 98)
After reinstalling the LAN and modem drivers, it is recommended
that you confirm the network protocol setting:
1. Select StartÅSettingsÅControl Panel. Double-click Network,
then select the Configuration tab.
2. Verify that the desired protocols are included on the list of
installed network components.
NOTE: For information about adding a network protocol, refer to
your operating system documentation.
To Next Page
Loading...
Need help?
General