Computer Setup and Diagnostics Utilities 15-5
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: Beth Zanca Saved by: J Abercrombie Saved date: 04/26/00 4:53 PM
Part Number: 170045-002 File name: Ch15
Selecting from the Advanced Menu Continued
Begin here To do this
Device Options
■ Enable/disable the embedded
numeric keypad at startup.
■ Enable multiple standard pointing
devices at startup, or disable this
feature so the computer supports
only a single (usually
non-standard) pointing device at
startup.
■ Enable/disable USB legacy
support for one USB mouse and
one USB keyboard. (When USB
legacy support is enabled, the
keyboard and mouse work
without a loaded USB driver.)
■ Set an optional external monitor
or overhead projector connected
to a video card in a docking base
as the primary device. (When the
computer display is set as
secondary, the computer must
be shut down before undocking.)
■ Change the parallel port mode
from EPP (default) to standard,
bidirectional, EPP, or ECP.
■ Enable/disable the
Intel Pentium III with SpeedStep
technology processor settings or
set the computer to run in Battery
Optimized mode in all
circumstances.
■ Change Product Identification
Settings to specify how the
computer recognizes multiple,
identical docking base that are
identically equipped or from
reporting the processor serial
number software.
To Next Page
Loading...
