2-6 Setup Utilities and Diagnostic Features
Computer Setup Menu
Continued
Heading Option Description
Storage Device Configuration
(continued)
Secondary IDE Controller
Allows you to enable or disable the secondary IDE controller.
Diskette MBR Validation
Allows you to enable or disable strict validation of the diskette
Master Boot Record (MBR).
Note:
If you use a bootable diskette image that you know to be
valid, and it does not boot with Diskette MBR Validation
enabled, you may need to disable this option in order to use the
diskette.
DPS Self-Test Allows you to execute self-tests on IDE hard drives capable of
performing the Drive Protection System (DPS) self-tests.
Note:
This selection will only appear when at least one drive
capable of performing the IDE DPS self-tests is attached to the
system.
Boot Order Allows you to specify boot order of installed peripheral devices
(such as LS-120 drive, diskette drive, hard drive, SCSI drive,
CD-ROM drive, or DVD-ROM drive).
Security Setup Password Enables setup (administrator) password.
See Section 3.2, Asset Tracking and Security, for more
information.
Power-On Password Enables power-on password.
See Section 3.2, Asset Tracking and Security for more
information.
Password Options Enables/disables network server mode.
Specifies prompting for power-on password.
See Section 3.2, Asset Tracking and Security, for more
information.
Note:
This selection will appear only if a power-on password is
set.
Smart Cover Enables/disables Smart Cover Sensor and Cover Lock. (Feature
supported on select models only.)
Lists most recent cover removal. (Feature supported on select
models only.)
See Section 3.2, Asset Tracking and Security, for more
information.
Continued
To Next Page
Loading...
Need help?
General