F-10 Troubleshooting Without Diagnostics
Memory
Problem Possible Solution
System won't boot or does not
function properly after installing
additional memory modules
Memory module is not the correct type or speed grade for the system.
Replace module with the correct industry-standard device for the
computer.
Out of Memory error. 1. Memory configuration may not be set up correctly; check memory
configuration using Device Manager.
2. The computer has run out of memory for the application. Check the
application documentation to determine the memory requirements.
Memory count during POST is
wrong.
Memory modules may not have been installed correctly or incorrect
modules may have been used.
Insufficient memory error during
operation.
1. Too many Terminate and Stay Resident programs (TSRs) are
installed. Delete any unnecessary TSRs.
2. There is not enough memory for the application. Check the memory
requirements for the application or add more memory.
Unit is on but there is no video and
the power LED is blinking red.
Memory is not installed correctly and system is not booting. Reinstall
memory modules.
To Next Page
Loading...
Need help?
General