Compaq ProLiant 3000 Setup And Installation

5-15
ProLiant 3000 Setup and Installation Guide
Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002
File Name: F-CH05.DOC Last Saved On: 1/27/98 4:22 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Loading Compaq Device Drivers
Drivers are located on the Compaq SmartStart and Support Software CD.
IMPORTANT:
Always check
README
files on the SmartStart and
Support Software CD. If present, these files may contain information about
important software updates.
Novell NetWare Device Drivers form Compaq
Your server must have certain device drivers to operate using NetWare. These
drivers are located on the Compaq SmartStart and Support Software CD
shipped with the server. If you use SmartStart to install the operating system,
these drivers will be installed automatically. Otherwise, you can use SmartStart
to create Support Software for Novell Products Novell (SSD) diskettes to
support a manual installation of Novell products.
For more information on these drivers, run the README.COM file in the root
directory of the NetWare Programs from the Compaq diskette.
Manual installation
If you choose to configure the server without SmartStart, follow this procedure:
1. Insert the Compaq SmartStart and Support Software CD into the CD-
ROM drive.
2. Boot your system.
3. Select Non-SmartStart Setup.
4. Follow the instructions provided by the operating system that you are
installing.

Compaq ProLiant 3000 Specifications

General

Brand	Compaq
Model	ProLiant 3000
Category	Server
Language	English