Name: Compaq ProLiant 3000
Brand: Compaq
Rating: 4 (1 reviews)

To Next Page

To Previous Page

4-11

ProLiant 3000 Setup and Installation Guide

Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002

File Name: E-CH04.DOC Last Saved On: 1/27/98 4:20 PM

COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED

For the best performance, DIMM banks should be added in the following

order:

First: Bank 3 (as shipped)

Bank 1 (system board)

Bank 4 (memory board)

Bank 2 (system board)

Bank 5 (memory board)

Last: Bank 6 (memory board)

Accessing the Drive Cage Back Plane

These instructions cover the removal of the hot-plug SCSI drive and removable

media cage, removal of the Simplex Enable board, and installation of the

Duplex Enable board. This procedure enables controller duplexing of the

internal SCSI drives. Refer to the Compaq ProLiant 3000 Cabling Guidelines

Reference Guide for more information on configurating duplex and simplex

modes.

1. Remove the side panel as shown in Figure 4-1.

Other manuals for Compaq ProLiant 3000

Questions and Answers:

Need help?

Do you have a question about the Compaq ProLiant 3000 and is the answer not in the manual?

General