4-12
Installing Hardware Options
Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002
File Name: E-CH04.DOC Last Saved On: 1/27/98 4:20 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
2. Remove the fans and set them aside. You should not have to remove the
cables to the fans.
CAUTION: Never power up the server if both fans have
been removed from either the processor or I/O section.
Overheating and damage to hardware could result.
2
1
Figure 4-10.
Removing a fan
To Next Page
Loading...
