Compaq ProLiant 3000 Setup And Installation

6-5
ProLiant 3000 Setup and Installation Guide
Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002
File Name: G-CH06.DOC Last Saved On: 1/27/98 4:23 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
System Behavior with Error Events
After system POST, if there is an F1 error condition, the IMD flashes this
message:
ESC
!ALERT!
Press Any Key
to View New
Events
LCD-013.EPS
Figure 6-3.
New Event Message
At this point you must scroll through each screen of the event information menu
before the IMD will allow you to move on to other menu choices. The display
will not allow you to escape out of the Unviewed Events section until you have
examined all of the information stored here.
For information on interpreting the event messages, see the section titled
“Integrated Management Log” later in this chapter.
After you have reviewed the events, you are able to proceed with normal
display operation.

Compaq ProLiant 3000 Specifications

General

Brand	Compaq
Model	ProLiant 3000
Category	Server
Language	English