Compaq ProLiant 3000 Setup And Installation

1-1
ProLiant 3000 Setup and Installation Guide
Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002
File Name: B-CH01.DOC Last Saved On: 1/27/98 4:09 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Chapter 1
Compaq ProLiant 3000 Server
Features
Compaq ProLiant 3000 servers deliver state-of-the-art Intel Pentium II
processor technology, expanded storage capacity, dual memory controllers,
dual peer PCI buses, and advanced high-availability features.
Performance is maximized with up to two Pentium II processors, a new system
architecture that improves overall system bandwidth, and up to 512 megabytes
(for 300MHz models) or up to 3 gigabytes (for 333MHz models) of buffered
EDO ECC memory. Input/output performance is enhanced by features such as
Wide-Ultra SCSI-3 hard drives.
Compaq ProLiant 3000 servers provide state-of-the-art reliability and high-
availability features, including redundant hot-pluggable power supplies and
hot-pluggable Wide-Ultra SCSI-3 drives.
To facilitate upgrade and repair tasks, Compaq designed the ProLiant 3000
server so that no tools are required to enter the chassis.
Standard Features
The following features are standard on all Compaq ProLiant 3000 models,
unless otherwise noted.
Processor Boards
■ Support for up to two Intel Pentium II processors (1 processor per
processor board) with corresponding processor power modules, and
512K cache
■ Upgradable to future Intel Pentium II processors

Compaq ProLiant 3000 Specifications

General

Brand	Compaq
Model	ProLiant 3000
Category	Server
Language	English