Compaq ProLiant 3000 - System Configuration Utility Main Menu; System Configuration Menu

5-6
Server Configuration and Utilities
Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002
File Name: F-CH05.DOC Last Saved On: 1/27/98 4:22 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
System Configuration Utility
Main Menu
This overview of the main menu options overview explains how to access the
main menu and how to set the power-on features. The following options are
available from the main menu:
■ System Configuration - Takes you through the configuration process
step-by-step. Select the System Configuration option when a
configuration change is required. For example, select this option when
adding, replacing, or removing expansion boards, or when adding a
diskette or hard drive.
■ Operating System Installation - Allows you to install one of the
operating systems listed or to specify installation of an operating system
that is not listed.
■ Diagnostics and Utilities - Tests and inspects the computer.
■ Exit from this Utility - Restarts the computer.
System Configuration Menu
The following options are available from the System Configuration
Utility menu:
■ Configure Hardware
■ Power-On Defaults
■ System Partition
■ Configuration Backup