Compaq ProLiant 3000 Setup And Installation

6-1
ProLiant 3000 Setup and Installation Guide
Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002
File Name: G-CH06.DOC Last Saved On: 1/27/98 4:23 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Chapter 6
Integrated Management
This chapter contains instructions and guidelines for using the Integrated
Management features in Compaq ProLiant 3000 servers that may not be
familiar to you. Subjects covered are:
■ Integrated Management Display
■ Integrated Management Log
Integrated Management Display
The Compaq Integrated Management Display (IMD) is an integrated, 16x4
character display mounted on the front of the server. This display provides
easy-to-use menu-driven access to server information. The following
paragraphs provide information on navigating and using the menus.
Normal Run-time Behavior
When powering up the server, the first IMD screen you see shows the model
number and LCD firmware revision of your display.
Next, a series of server Power-On Self-Test (POST) operations is displayed.
During POST, the display indicates the server test in progress by a spinning bar
beside the menu item. When the test is finished, the IMD shows a check mark
by the completed menu item. A check mark tells you the test is complete, but
does not necessarily mean the test was free from errors.
If an error occurs during POST, the server logs the error to the IMD under
Unviewed Events and requires you to view the error before proceeding to any
other menu choices.

Compaq ProLiant 3000 Specifications

General

Brand	Compaq
Model	ProLiant 3000
Category	Server
Language	English