Compaq ProLiant 3000 Setup And Installation

4-2
Installing Hardware Options
Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002
File Name: E-CH04.DOC Last Saved On: 1/27/98 4:20 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Accessing Non Hot-Plug Areas
To install options, upgrades or replacements in these areas, you must first shut
down the server power.
Accessing Processors, Memory Board, and
System Board
WARNING: To reduce the risk of injury from
electrical shock, remove all power cords to
completely disconnect power from the system.
WARNING: To reduce the risk of electric shock or damage to
the equipment:
■ Do not disable the power cord grounding plug. The
grounding plug is an important safety feature.
■ Plug the power cord into a grounded (earthed) electrical
outlet that is easily accessible at all times.
WARNING: To reduce the risk of personal injury from hot
surfaces, allow the internal system components to cool before
touching.
WARNING: To reduce the risk of personal injury from contact
with hazardous energy, the equipment is provided with safety
interlocks. Do not attempt to defeat this safely interlock. See
the topic “Interlock System” later in this chapter for more
information.
CAUTION: Electrostatic discharge can damage electronic
components. Be sure you are properly grounded before
beginning any installation procedure.

Compaq ProLiant 3000 Specifications

General

Brand	Compaq
Model	ProLiant 3000
Category	Server
Language	English