Compaq ProLiant 3000 Setup And Installation

4-20
Installing Hardware Options
Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002
File Name: E-CH04.DOC Last Saved On: 1/27/98 4:20 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Interlock System
The interlock system prevents power distribution throughout the system if any
of the following conditions exist:
1. Top access panel not installed
2. Side access panel not installed
3. Processor or terminator card not fully installed or not properly seated
If any one or more of the above conditions are not met, the main power supply
output is disabled; however, auxiliary power still remains in the exposed areas.
WARNING: Compaq ProLiant 3000 Models are capable or
producing energy levels that are considered hazardous. To
reduce the risk of personal injury:
■ Do not attempt to defeat the safety interlocks that prevent
access to hazardous energy.
■ Do not repair accessories and options inside enclosed or
interlocked areas of the system. repair should be performed
only by individuals who are qualified in serving computer
equipment and trained to deal with products capable of
producing hazardous energy levels.
CAUTION: To prevent loss of data or damage to the
equipment, place the system in STANDBY before removing the
top access panel, side access panel, or processor card. When
one of these items is removed, the power supply is disabled
until the item is replaced.

Compaq ProLiant 3000 Specifications

General

Brand	Compaq
Model	ProLiant 3000
Category	Server
Language	English