Compaq ProLiant 3000 - Critical Error Log

6-9
ProLiant 3000 Setup and Installation Guide
Writer: Tom Erber Project: ProLiant 3000 Setup and Installation Guide Comments: 296908-002
File Name: G-CH06.DOC Last Saved On: 1/27/98 4:23 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Viewing the Event List
1. From Compaq Insight Manager, select the appropriate server, then select
View Device Data.
The selected server is displayed with buttons around its perimeter.
2. Select the Recovery button.
3. Select Integrated Management Log.
NOTE
: You can only view the list from the Recovery/Integrated Management
screen. To print the list, follow the instructions below.
4. If a failed component has been replaced, select the event from the list;
then select Mark Repaired.
Printing the Event List
NOTE
: You can only view the list from the Recovery/Integrated Management Log
screen as described above. To print the list, follow the instructions below.
1. From the Insight Manager, select the appropriate server.
The selected server is displayed with buttons around its perimeter.
2. Select the Configuration button.
3. Select the Recovery button.
4. Select Print.