Description l 2-3
2
Description
Typical Applications (continued)
Model Drying Temperature Range
Low temperature (with precooler)* 100° - 150°F {38° - 66°C}
Standard 150° - 240°F {66° - 116°C}
High heat (with aftercooler)* 150° - 375°F {66° - 191°C}
Low-high (with aftercooler & precooler)* 100° - 375°F {38° - 191°C}
* See page 3-13 and Appendix B and C.
• Throughput rates of 150 to 400 lbs {68.1 to 149.2 kg} per hour (some
materials can be run at a higher rate).
• Dewpoints of -40°F {-40°C}.
Use the aftercooler when:
• You are drying at temperatures over 240°F {116°C}.
• Throughput rates are less than 50% of the dryer’s rated capacity.
• You are pre-drying material at temperatures over 150°F {66°C}
Standard Dryer Features
• Dewpoint monitor / dewpoint control
• Audible and visual alarm
• Temperature setback
MDC Options (models 150 & 200 only)
• Non dry air conveying
• Machine loading only
• Self loading (machine and hopper loading)
When supplied for
central drying appli-
cations, the W series
dryer is not equipped
with a process heater.
Therefore, as a cen-
tral dryer, the W
dryer will only sup-
ply dry air to the hop-
pers.
To Next Page
Loading...
