Before Beginning (continued)
❏ Find the wiring and equipment diagrams that were shipped
with your dryer. These diagrams are the best reference for correct-
ing a problem. The diagrams also will note any custom features,
such as special wiring or alarm capabilities, not covered in this
User Guide.
6
Troubleshooting
A Few Words of Caution
The Carousel Plus W Series dryer is equipped with numerous safety devices.
Do not remove or disable them. Improper corrective action can lead to haz-
ardous conditions and should never be attempted to sustain production.
WARNING: Only qualified service personnel should examine and correct
problems that require opening the dryer’s electrical enclosure or using
electrical wires to diagnose the cause.
WARNING: High voltage. Always stop the Carousel Plus dryer,
disconnect and lock out the main power source before troubleshooting
or performing repairs.
CAUTION: Hot surfaces. Always protect yourself from hot surfaces inside
and outside of the dryer and hopper.
See warnings
below. Open the
electrical enclosure
to check fuses and
heater contactors.
Troubleshooting l 6-3