Carousel Plus W Series Dryer
Options
• Volatile trap (only in conjunction with aftercooler) - The volatile trap is
recommended if drying materials that produce volitales that condense into a
waxy or oily residue and/or if the material contains excessive fines.
• Precooler - The precooler reduces the temperature of air flow after the desic-
cant wheel and before the process heater.
• Filter check - The Filter check sensor will activate a passive alarm when the
process filter is clogged or needs to be replaced.
• Heater current monitor - The heater current monitor measures the total
amperage across both the process and regeneration heaters and the pre-deter-
mined power consumption values for the blowers and the control.
• CFM monitor - The CFM monitor measures the cubic feet per minute of air
flow across the inlet/outlet of the process blower.
• DeviceNet or SPI communications - Allows the dryer to be networked to
industrial control systems. DeviceNet communications are standard. Alternate
communications are available.
2
Description
Description l 2-7
To Next Page
Loading...
