Conair 150 - What is the Carousel Plus W Series Dryer?; Typical Applications

What is the Carousel Plus W Series
Dryer?
The Carousel Plus W Series dehumidifying dryer produces hot, low-dewpoint air
that removes moisture from hygroscopic plastics. The dryer pulls warm, moist air
from a drying hopper and circulates it through a dehumidifying desiccant wheel.
The dryer then heats the air to the drying temperature you selected and circulates it
through the material in the hopper.
The dryer’s closed-loop design ensures a continuous supply of hot, dehumidified
air while preventing contamination from moisture in the plant.
Typical Applications
1 Dryer on the floor; hopper on the throat.
2 Hopper on a floor stand; the dryer next to it.
3 Dryer and hopper on a mobile floor stand (MDC version 150 and 200 only).
4 Central dryer, with ResinWorks system.
The W Series Dryer can be used successfully in applications that require:
• A contamination-free drying environment.
• Drying temperatures within the ranges shown in the following table:
2-2 l Description
(continued)