Conair 150 - Page 40

REGENERATION TEMP
ACT 425 ˚ F SET 425 ˚ F
RETURN AIR TEMP
ACT 120˚F SET 120˚F
PROCESS DEWPOINT
ACT -47˚F SET -40˚F
POWER ON
CONAIR CP100
CV00.06.2 DV00.09.8
3 SEC DELAY
MONDAY
7/22/2003 07:59 AM
3 SEC DELAY
PROCESS TEMPERATURE
Act 140˚F Set 140˚F
REGENERATION TEMP
ACT 350 ˚ F SET 350˚F
RETURN AIR TEMP
ACT 120˚F SET 120˚F
MACHINE LOADER
LOAD TIME 10 SEC
HOPPER LOADER
LOAD TIME
10 SEC
PRESS MENU KEY
AT ANY TIME
DRYER MAIN MENU
STAT SETUP DIAG
Central Dryer
STD DRYER
1
2
3
4
5
MDC HOPPER LOADER
PROCESS DEWPOINT
ACT -47˚F SET -40˚F
6
7
11
12
4
5
11
MACHINE LOADER
LOAD TIME 10 SEC
MDC
6
PRESS
MENU
KEY
PRESS
MENU
KEY
MDC HOPPER LOADER AND RATIO
6
8
9
10
MACHINE LOADER
LOAD TIME 10 SEC
HOPPER LDR VIRGIN
LOAD TIME 20 SEC
HOPPER LDR REGRIND
LOAD TIME 20 SEC
HOPPER LOADER
LAYERING ON
DM T6 TOP
ACT 150˚F
DM T5
ACT 155˚F
DM T4
ACT 158˚F
DM T3
ACT 160˚F
DM T2
ACT 163˚F
DM T1 BOTTOM
ACT 165˚F
103
104
105
106
107
108
When configured as a
central dryer, there is
no process heater in the
system. Therefore, any
function associated with
the process heater is not
available for central
dryer configurations.
4-4 l Operation
NOTE: If you have purchased the DM-II (drying monitor)
option, see the DM-II Appendix for information pertaining
to its operation.
✐
When the DM-II monitor option is purchased
these screens will be displayed.