Maintenance l 5-9
5
Maintenance
Cleaning the Regeneration Filter (continued)
4 Clean dust, fines, and dirt from the filter,
or replace it with a new filter. Clean the
filter by laying it on its side and gently
tapping it on the floor. Replace damaged,
worn, or clogged filters.
5 Reverse the procedure to reinstall the
regeneration filter.
CAUTION: Wear eye protection. If you use
compressed air to clean the equipment, you
must wear eye protection and observe all
OSHA and other safety regulations pertaining to
the use of compressed air.
To Next Page
Loading...
