Conmet Conventional - Page 2

About this Manual
Before You Begin
- Read this manual carefully,
providing extra attention to its
explanations and instructions.
- To ensure safe, continuous,
trouble-free operation,
understand your wheel
hub system, and keep
all components in proper
operating condition.
- Pay particular attention to
all NOTES, CAUTIONS,
WARNINGS, and DANGERS
to avoid the risk of personal
injury or property damage,
and realize these statements
are not exhaustive. ConMet®
cannot possibly know or
evaluate all conceivable
methods in which service may
be performed or the possibly
hazardous consequences of
each method. Accordingly,
those who use a procedure
not recommended by ConMet
must rst satisfy themselves
that neither their safety nor
the safety of the product will
be jeopardized by the service
method selected.
- Use only ConMet approved
replacement parts. Do not
attempt to use damaged
parts.
- Follow your company’s
maintenance and service,
installation, and diagnostics
guidelines.
- Use special tools when
required to help avoid serious
personal injury and damage
to components
Color Coding
Throughout this manual we will use
the following colors to help identify
specic areas that reference
Conventional, PreSet®, and PreSet
Plus® ConMet hubs.
Conventional
PreSet
PreSet Plus
If a color is not specied, then you
can conclude the information is
mutual for all hub assemblies.
Hazard Alert Messages
A Danger alert indicates a hazardous situation
which if not avoided, will result in death or
serious injury.
DANGER
!
A Warning alert indicates a hazardous situation
which if not avoided, could result in death or
serious injury.
WARNING
!
A Caution alert indicates a hazardous situation
which if not avoided, could result in minor or
moderate injury.
CAUTION
!
A note includes additional information that may
assist the technician in service procedures.
NOTE
Additional Maintenance
and Service Information
On the Web
Visit conmet.com to access
ConMet’s product, sales, service
and maintenance literature.
ConMet Customer Service
Call ConMet’s Customer Service at
1-800-547-9473.
ConMet Decals
The following decals are available
upon request:
Decal Name PreSet Part
Number
PreSet Plus
Part Number
Disc Wheel
Installation
Procedures
103282 103282
Hubs
Lubricated
with Oil
106873 10038167
Hubs
Lubricated
with Semi-
Fluid Grease
107383 10038168
ConMet, PreSet, and PreSet Plus are registered trademarks of Consolidated Metco Inc. © Consolidated Metco Inc. 2017, All Rights Reserved.