Conmet Conventional - Rotor Resurfacing

50 ConMet
10. Hub and Rotor Inspection (continued)
62
106866a
MIDDLE
OF ROTOR
Middle of Rotor
FIGURE 120
63
106867a
BOTTOM
OF ROTOR
Bottom of Rotor
FIGURE 121
Rotor Resurfacing
ConMet does not recommend
resurfacing disc brake rotors.
However, if rotor resurfacing is
necessary, be sure that at least
0.060" of material is left above
the rotor minimum thickness
specication to allow for wear
before the minimum allowable rotor
thickness is reached.