Conmet Conventional - 8. Brake and Wheel Installation

39ConMet
PreSet Plus Wheel Hubs – Service Parts
6. PreSet Plus Wheel Hubs – Service Parts
ConMet Installation Tools
Axle Designation Installation Tool Part Number Minimum Diameter* Maximum Diameter*
FF Steer 10084010 4.45" 4.65"
FL Steer 10084011 5.2" 5.4"
R-Drive 10084012 5.6" 5.85"
TN Trailer 10084013
TP Trailer 10084013
*Required at plate dimensions if you are not using a ConMet installation tool (minimum of 3/8", 9.5 mm thick).
Approved PreSet Plus Aftermarket Bearings
Description ConMet Number Bearing Set Number
FC Steer Axle
Inner Cup & Cone 10037695 Not available in sets
Outer Cup & Cone 10037696
FF Steer Axle
Inner Cup & Cone 10041905 Set 427
Outer Cup & Cone 10041906 Set 428
FL Steer Axle
Inner Cup & Cone 10041925 Set 445
Outer Cup & Cone 10041926 Set 446
L-Drive Axle
Inner Cup & Cone 10037959 Not available in sets
Outer Cup & Cone 10037960
R-Drive Axle
Inner Cup & Cone 10041915 Set 429
Outer Cup & Cone 10041916 Set 430
TN Trailer Axle
Inner Cup & Cone 10041935 Set 431
Outer Cup & Cone 10041905 Set 427
TP Trailer Axle
Inner Cup & Cone 10041945 Set 432
Outer Cup & Cone 10041945 Set 432