33
9. PARTS AND ACCESSORIES
The following optional parts and accessories are available for the ST450EC sensing head:
Spare parts / consumables
2 core shielded cable, 2x0,75 mm
2
(flexible cores), per meter
Duct mounting set for mounting in ventilation ducts
Sensor protection against splash water
Inline flow adapter for sample applications, connection 2x6mm, SS
Protective hood SS, for optimal protection in “wet” protection areas,
dim. 315x300x138 mm
Isolation board, 160x160 mm
SS bracket, extra protection for use in warehouses
Test gases and accessories
Nitrogen, 100 Vol.%, 110 gas liters
Synthetic air, 20,9% O
2
/ 79% N
2
, 110 gas liters
Hydrogen sulfide, 10 ppm in air, 58 gas liters
Hydrogen sulfide, 25 ppm in air, 58 gas liters
Carbon monoxide, 50 ppm in air, 110 gas liters
Carbon monoxide, 100 ppm in air, 110 gas liters
Carbon monoxide, 500 ppm in air, 110 gas liters
Hydrogen, 200 ppm in air, 110 gas liters
Hydrogen, 2 Vol.% in air, 110 gas liters
Tygon gas hose, Ø 6mm, per meter
Flow regulator brass (applicable for 58/110 gas liters), fixed flow 0,5
l/min
Flow regulator SS (applicable for 58/110 gas liters), fixed flow 0,5 l/min
Consilium offers a wide range of test gases, if the required test gas is not listed, please contact us.