Manufacturer:
Buveco Gasdetection BV
Jan van der Heydenstraat 50
2665 JA BLEISWIJK - The Netherlands
This declaration of conformity is issued under the sole responsibility of the manufacture.
The object of the declaration described above is in conformity with the relevant Union harmonization legislation:
2014/34/EU - Equipment for potentially explosive atmospheres, ATEX Directive.
References to the relevant harmonized standards used or references to other technical specifications in relation to
which conformity is declared:
EN 60079-0:2012 +A11 Explosive atmospheres - Part 0: Equipment - General requirements.
EN 60079-1:2007 Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d".
EN 60079-31:2009 Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t".
2014/30/EU - Electromagnetic Compatibility (EMC) Directive.
References to the relevant harmonized standards used or references to other technical specifications in relation to
which conformity is declared:
EN 50270:2015 Electromagnetic compatibility. Electrical apparatus for the detection and measurement
of combustible gases, toxic gases or oxygen.
EN 61000-3-2:2014 Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current
emissions.
EN 61000-3-3:2013 Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes,
voltage fluctuations and flicker in public low-voltage supply systems.
Kiwa ExVision Apeldoorn (NL) notified body number 0620, performed the ATEX examination described above and
issued the certificate: KIWA 16ATEX0008 X.
Dekra Certification BV (NL) notified body number 0344, performed the Product Quality Assurance examination and
issued the certificate: DEKRA 15ATEXQ0098.
Signed for and on behalf of:
Buveco Gasdetection BV
Bleiswijk, 20 September 2018
E.K.D. Sie, R&D Manager
To Next Page
Loading...
