1.3 Customer Documentation Structure
Unit documentation parts
Document type Contents
Installation manual
■
Describes how to transport, set up, install, and put the unit into opera‐
tion
■
Goes over all the hazards involved in the various installation activities
and how to prevent and/or counter them
■
Contains technical specifications
Operating manual
■
Describes the work sequences and operating steps when cooking and
cleaning
■
Includes the maintenance schedule and troubleshooting information
■
Goes over all the hazards involved when operating the unit and how to
prevent and/or counter them
Operating instructions
■
Describes the unit’s user interface
■
Includes the instructions for using the software
Documentation for accessories
For information on how to install accessories (e.g., recoil hand shower, hood, stand on casters, stack‐
ing kit), please refer to the corresponding instructions for accessories.
1.4
About This Installation Manual
Target groups for this installation manual
Name of target group Tasks
Combi oven owner
or
the owner's employee
who is responsible for
the unit and for the staff
operating it
■
Briefed on all of the combi oven's safety-relevant functions, mecha‐
nisms, and devices by the person placing the unit into operation
■
Shown how the unit is operated by the person placing the unit into oper‐
ation
■
If necessary, helping out as directed with transportation within the facili‐
ties and with setting up the unit
For more detailed information, please refer to
'Obligations of Combi Oven
Owner' on page 20
Mover Transporting the unit within the facilities
Service technician
■
Setting up the unit
■
Installing the fully automatic oven cleaning system
■
Placing the unit into operation and removing it from service
Electrician
■
Connecting the unit to the electrical connection at the facilities
■
Uninstalling electrical connections
Water and wastewater
installer
■
Connecting the unit to the water connection at the facilities
■
Uninstalling water connections
■
Connecting the unit to the drain connection at the facilities
■
Uninstalling the drain connection
Person placing the unit
into operation
(service technician)
■
Responsible overall for placing the combi oven into operation
■
Briefing the user
Decimal mark used
In order to ensure that all numbers can be properly understood internationally, a decimal point is al‐
ways used.
1 General
Installation Manual 9
To Next Page
Loading...
Need help?
General
