COP Security XT Series

To Next Page

To Previous Page

3-6-2. SETUP-ALARM/SENSOR-ALARM MOTION MANAGER

This Sub-Menu selects the alarm outputs to be triggered by Motion triggered on specific cameras.

1) Select [ALARM MOTION MANAGER] using (▲)(▼) buttons, and press [ENTER] button to select.

2) The Alarm Motion Manager Matrix will be displayed

2) Use the Cursor (▲)(▼)(◀)(▶) buttons to highlight the icon that lies on both the column for the camera to

trigger the Alarm, and the Row for the Alarm output to be triggered.

3) Press the [ENTER] button to toggle between

v(Alarm Output ON) or o(Alarm Output OFF)

4) Press the [MENU] button exit the Sub-Menu.

Note: For these settings to take effect the Alarm Output must be enabled: See Page 41

3-6-2. SETUP-ALARM/SENSOR-ALARM SENSOR MANAGER

This Sub-Menu selects the alarm outputs to be triggered by specific Sensor Inputs.

1) Select [ALARM SENSOR MANAGER] using (▲)(▼) buttons, and press [ENTER] button to select.

[SETUP-SENSOR / ALARM]

- SENSOR TYPE

- ALARM MOTION MANAGER

-<ALARM SENSOR MANAGER>

- ALARM BUZZER

- ALARM OUTPUT

- ALARM OUT PERIOD

[SETUP-SENSOR/ALARM MOTION MANAGER]

]CHANNEL NO

1 2 3 4

ALARM 1 

ALARM 2 

ALARM 3 

ALARM 4 

ALL 

3. SETUP