COP Security XT Series - 3-2 Live Display Setup

16
3-2. SETUP-LIVE
3-2-1. SETUP-LIVE-SEQUENCE DWELL(FULL)
When Sequence is selected as the live display format, each camera image will be shown in full screen, for
the dwell period selected here, in channel number order. (To miss a channel select 0 as the Dwell Time)
1) Select [SEQUENCE DWELL (FULL)] by using (▲)(▼) buttons and press the [ENTER] button to access
the selected sub-menu.
2) Use the number buttons to select the individual
channel dwell time. Range: 0 to 9 seconds.
3) (▲)(▼)(◀)(▶) buttons are used to move onto another
channel. Press the [ENTER] button to complete setup.
[SETUP-LIVE]
-<SEQUENCE DWELL(FULL)>
- CAMERA NAME
- CAMERA STATUS
- CAMERA COLOR
- PTZF PROTOCOL
- PTZF ID
[SETUP-LIVE S.DWELL(FULL)]
NO SEC NO SEC
CHANNEL 01 <2>
CHANNEL 02 2
CHANNEL 03 2
CHANNEL 04 2
3. SETUP
[SETUP]
-<SYSTEM>
-LIVE
-REC
-STORAGE
-NETWORK
- SENSOR/ALARM
- AUDIO