COP Security XT Series - 3-6 Alarm and Sensor Setup; 3-6-1 Sensor Type Configuration

37
3-6. SETUP-ALARM/SENSOR
3-6. SETUP-ALARM/SENSOR
From this Sub-Menu the type of Sensor Inputs and the Alarm Outputs can be set.
1) Highlight [ALARM/SENSOR] using (▲)(▼)button, and press [ENTER] to select the Sub-Menu.
3-6-1. SETUP-ALARM/SENSOR – SENSOR TYPE
From this Sub-Menu the type of each Sensor Input can be set.
1) Highlight [SENSOR TYPE] using (▲)(▼)button, and press [ENTER] to select the Sensor Matrix.
2) Use the cursor (▲)(▼)(◀)(▶) buttons to highlight NO or NC next to the Channel number to change
3) Press the [ENTER] button to display the sensor type selection window.
4) Highlight the choice of sensor type using the (▲)(▼) buttons and press the [ENTER] button to select.
5) Press the [MENU] button to exit the Sub-Menu.
[SETUP-SENSOR / ALARM]
-<SENSOR TYPE>
- ALARM MOTION MANAGER
- ALARM SENSOR MANAGER
- ALARM BUZZER
- ALARM OUTPUT
- ALARM OUT PERIOD
[SETUP-SENSOR/ALARM-SENSOR TYPE]
SENSOR 01 <- NO>
SENSOR 02 - NO
SENSOR 03 - NO
SENSOR 04 - NO
TYPE
-NC
-NO
-NO
3. SETUP
[SETUP]
-<SYSTEM>
-LIVE
-REC
-STORAGE
-NETWORK
- SENSOR/ALARM
- AUDIO