EasyManua.ls Logo

Corken Z2000 - Appendix C: Performance Curves (Z4200;ZH4200); Capacity vs. Differential Pressure

Default Icon
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendix C—Z4200 and ZH4200 Performance Curves
125
180
200
220
240
260
280
300
320
340
360
100755025
400
380
Differential Pressure (psid)
Capacity (gpm)
1
500 RPM
600 RPM
650 RPM
750 RPM
1
The chart shows approximate delivery rates as seen in vapor equalized propane systems at 70°F (21°C) with no pressure loss in pump suction piping.
The following will cause increased vaporization of the liquid in the pump suction, adversely affecting the delivery:
1. Restrictions in the suction piping such as internal valves, excess flow valves, elbows, etc.
2. Restriction or lack of a vapor return line
3. Temperatures below 70°F (21°C)
This loss of delivery is not caused by the pump but is a result of the natural thermodynamic properties of liquefied petroleum gases. See the
“GUIDE TO CORKEN LIQUEFIED GAS TRANSFER EQUIPMENT” (CP226) for additional information.
24

Related product manuals