Cortalk RMU5 Generic - Revision History

MOBILTEX® DATA LTD.
TITLE:
RMU5 Generic Installation and Configuration Guide
Calgary, Alberta
DOCUMENT NO.:
RMU5-MAN-001
SHEET:
2 of 69
REV:
1.10
RESTRICTED PROPRIETARY INFORMATION
This information disclosed herein is the exclusive property of Mobiltex
®
Data Ltd. and is not to be disclosed without the
written consent of Mobiltex
®
Data Ltd. No part of this publication may be reproduced or transmitted in any form or by
any means including electronic storage, reproduction, execution or transmission without the prior written consent of
Mobiltex
®
Data Ltd. The recipient of this document by its retention and use, agrees to respect the security status of the
information contained herein.
This document is intended for limited circulation.
The information contained in this document is subject to change without notice and should not be construed as a
commitment by Mobiltex
®
Data Ltd. unless such commitment is expressly given in a covering document.
© Copyright Mobiltex
®
Data Ltd. (2016)
CURRENT REVISION APPROVALS (Revision 1.10)
Name
Location
Job Function
Signature
Date
Tony da Costa
Calgary
Author, Engineering Manager
Jerry Chilibecki
Calgary
Engineering Director
REVISION HISTORY
Rev
Start
Date
Approval
Date
Description
Prepared By
Draft
0.01
Oct 2, 2007
First Draft
Tony da Costa
Draft
0.02
Oct 18, 2007
Added DRI1 board information. Minor edits.
Tony da Costa
Draft
0.03
Feb 15, 2008
Added changes for isolated analog board. Added additional MODBUS register
information.
Tony da Costa
Draft
0.04
June 12, 2008
Changed installation diagram to reflect INT+/INT- labeling on overlay.
Tony da Costa
Draft
0.05
Oct 10, 2008
Added changes for pre-calibrated AIO1 boards. Added information on Skywave
IsatM2M satellite transceiver.
Tony da Costa
1.00
Jan 30, 2009
Original production release. Updated branding.
Tony da Costa
1.01
Apr 22, 2009
Formatting to match other corTalk documentation. New driver/app install
procedure. Deleted RMU5-ISAT installation procedure, and added reference to
RMU5-MAN-002 in its place.
Tony da Costa
1.02
Jun 16, 2009
Added general safety section. Updated Easytrack installation section. Updated
general installation section.
Tony da Costa
1.03
Oct 23, 2009
Added repeat daily interruption schedule information. Updated configuration
application screen shots.
Tony da Costa
1.04
Jan 27, 2009
Updated with firmware v1.15 changes. Updated configuration application screen
shots. Added cellular GSM transceiver information. Updated MODBUS register
reference table for fixed-point operation mode.
Tony da Costa
1.05
April 12, 2010
Updating the document with several CSA requirements identical to the ISAT manual
Brian Dewald
Tony da Costa
Jerry Chilibecki
1.06
Nov 7, 2011
Nov 17, 2011
Update pictures. Added descriptions of new communications modes. Fixed polarity
on sample rectifier wiring diagram.
Jennifer Scott
Tony da Costa
1.07
July 19, 2013
Added TT3027 and DRI3 information.
Tony da Costa
1.08
June 10, 2014
Added IsatDataPro transceiver information.
Tony da Costa
1.09
Jan 20, 2015
Updated three-phase relay picture.
Updated specifications.
Tony da Costa
1.10
Dec 15, 2016
Updated cellular transceiver descriptions.
Tony da Costa